Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02–200 ng mL⁻¹), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL⁻¹) and limit of quantification (1.02 ng mL⁻¹), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.     

Thermal and pH Dual Responsive Copolymer and Silver Nanoparticle Composite for Catalytic Application

N‐Isopropylacrylamide and vinyl imidazole copolymer, P(NIPAM‐co‐VI), was synthesized by free radical emulsion polymerization. Then, the copolymer and silver nanoparticle composite, P(NIPAM‐co‐VI)‐Ag, was prepared by in situ reduction of AgNO₃ with NaBH₄. Due to the coexistence of thermal‐responsive PNIPAM and pH‐responsive PVI, P(NIPAM‐co‐VI) and P(NIPAM‐co‐VI)‐Ag exhibited both thermal and pH responsibility, their size would change while altering the temperature or pH of the circumvent. Their thermal and pH dual responsive properties were studied by dynamic light scattering (DLS). P(NIPAM‐co‐VI)‐Ag could be stably dispersed in water at a pH range from 3.0 to 9.3, which is favorable to use P(NIPAM‐co‐VI)‐Ag as a catalyst in the reduction reaction of p‐nitrophenol. The reaction rate constant (k_app) increased with the decrease of pH or the increase of VI content in the copolymer.     

Sensing behavior of BN nanosheet toward nitrous oxide: A DFT study

In order to develop a sensor for the detection of toxic N₂O molecules, the interaction of pristine and Aldoped BN nanosheets with an N₂O molecule was investigated using density functional theory calculations. It was found that unlike the pristine sheet, the Al-doped sheet can effectively interact with the N₂O molecule so that its electronic properties and conductivity are dramatically changed. Webelieve that replacing a B atom of the BN sheet with an Al atom may be a good strategy for improving the sensitivity of these nanosheets toward N₂O, which cannot be trapped and detected by the pristine sheet.     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].     

Synthesis,characterization and biological activities of organotin(IV) complexes with l-lysine monohydrate

Russian Journal of General Chemistry - The new organotin(IV) complexes have been synthesized by the reaction of l-lysine monohydrate with CS2 and R2SnCl2/R3SnCl. The organotin(IV) complexes and the...     

Nanomolar Determination of Methyldopa in the Presence of Large Amounts of Hydrochlorothiazide Using a Carbon Paste Electrode Modified with Graphene Oxide Nanosheets and 3‐(4′‐Amino‐3′‐hydroxy‐biphenyl‐4‐yl)‐acrylic Acid

A novel electrochemical sensor for sensitive detection of methyldopa at physiological pH was developed by the bulk modification of carbon paste electrode (CPE) with graphene oxide nanosheets and 3‐(4′‐amino‐3′‐hydroxy‐biphenyl‐4‐yl)‐acrylic acid (3,′AA). Applying square wave voltammetry (SWV), in phosphate buffer solution (PBS) of pH 7.0, the oxidation current increased linearly with two concentration intervals of methyldopa, one is 1.0×10^?8–1.0×10^?6 M and the other is 1.0×10^?6–4.5×10^?5 M. The detection limit (3σ) obtained by SWV was 9.0 nM. The modified electrode was successfully applied for simultaneous determination of methyldopa and hydrochlorothiazide. Finally, the proposed method was applied to the determination of methyldopa and hydrochlorothiazide in some real samples.     

Ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction for the determination of cadmium in water samples: Optimization using response surface methodology

A sensitive, simple, and rapid method is developed for ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction (IPSA-DLLME) and flame atomic absorption spectrometric determination of cadmium in water samples. In this procedure, trace amounts of Cd²⁺ were converted to CdI ₄ ^2– , and after addition of a tetrabutylammonium bromide (TBAB) solution as cationic surfactant the analyte was transformed to the ion-pair state. This cadmium species was extracted by fast injection of a solution containing 200 μL of chloroform and 800 μL of methanol as extraction and disperser solvents, respectively. The pH of the sample solution, concentration of iodide, TBAB amount, and the extractant volume were optimized using a 27-run Box–Behnken design with a triplicate central point. Under the optimized conditions, the calibration curve was linear in the range 1–200 μg L^–1 (R ² = 0.9959); with the detection limit (signal/noise = 3) of 0.28 μg L^–1. The relative standard deviations (RSD) for eight runs (Cd²⁺ = 10 μg L^–1) and enrichment factor were found to be 3.04 % and 50, respectively.